How to make 1/2 superflex jumper cable

How to make 1/2" superflex jumper cable?
If you are totally fresh at making a jumper cable, NOT A BIG QUESTION.
Volda team will teach you today how to do it right, just need a few steps.

Prepare your cable
Here are some preparation works we need to do before cutting the 1/2" superflex coaxial cable
1. Unwind the 1/2" superflex cable certain length at a time from the round plane
2. Cut a desired length of the cable. For a jumper, normal length is 3m or 3.5m.
3. Mark the separated cable with ID labels on both ends

To install connectors on the cutted cable
Please follow our instructions below
1. Use a knife to peel approx. 40 mm of the cable sheath away from the port
2. Put the red sealing ring onto the top of outer conductor corrugation
1/2 jumper cable

3. Separate the connector. Apply a small amount of grease and insert the back nut on the cable.
4. Use a plier to pull off the excess corrugated conductor
cable assemblies

5. Use the knife to cut off excess foaming layer
6. Use the plier to cut off excess inner copper tube to keep 10mm only
1/2 superflex jumper

7. Clear burrs and fillings and have the cut trimmed
8. Assemble the front part of connector and use a spanner to tighten it
1/2 jumper cable

ABOUT VOLDA
volda
We are an experienced telecommunication manufacturer and leading provider of BTS accessories in China since 2005. With many years of manufacturing and rich experience in telecom industry, Volda has set up two plant areas to provide a full line of coax accessories and weatherproofing to our clients around the world. We also provide 3-year warranty to all of our products.

Our products have been selected and used by both operators and distributors throughout the world, covering North America, Europe, South America, Middle East, etc. And we have these following advantages:
► Professional team work
► Experienced manufacturing & custom designing
► Self-owned tooling department
► Quality inspection from materails to product assembling
► Free samples provided, excellent export packaging

A Professional Manufacturer and Supplier for RF Coaxial Cables & Accessories

To Grow Your Business with The Trustworthy Supplier - Volda Since 2005