What are Feeder Cable Clamps, Coax Cable Hangers?
May 25, 2019 - VOLDA
Feeder Cable Clamp (Cable Hanger) Introduction
As a fixture, the feeder clamp, also can be called as cable clamp, cable hanger, coax clamp, is suitable for communication base station, repeater, indoor coverage system, wireless paging and microwave communication system, which plays a fixed role in the distribution cable in the tower, the wiring frame, the indoor and outdoor, and the layout in the subway and tunnel, and can be used in different high and low temperature range. Feeder clamp has the characteristics of economic and practical, sturdy and durable, reliable positioning and so on, so it can be widely used in many communication projects.
The feeder clamp is divided into the C-type bracket part and the plastic clamp part.
C-type bracket part, the use of q235,201,202 and 304, such as a variety of high-quality materials, and through the plating technology treatment, to achieve surface anti-acid and high toughness performance, so that it can be in the open air for a long time without deformation, non-oxidation; Plastic clamp part, the use of environmentally friendly polypropylene, ABS industrial plastics and anti-aging rubber, so that it has a good impact resistance, chemical corrosion resistance and other advantages. And in order to avoid the manual injury may caused in the installation process, C-type bracket sharp edges have adopted the inverted burr process, so as to achieve a beautiful appearance and safety of the double effect.
There are many types of feeder clamps:
According to the types, feeder clamp can be divided into Through Type Feeder Clamp, Double-Hole Type Feeder Clamp, Hoop Type Feeder Clamp, Ring Type Feeder Clamp, along with Wall Type Feeder Clamp, etc. According to the specifications, feeder clamp can be divided into 1/4", 3/8", 1/2", 7/8", 1-1/4" and 1-5/8", etc. According to the cable numbers, clamp can be divided into single run feeder clamp, double run feeder clamp, triple run feeder clamp, quadruple run feeder clamp.
Main Feature Parameters
Temperature range -55℃-+85℃
Aging test of anti-aging Xenon lamp 300H
Volda is a professional manufacturer and leading provider with 14 years of experience in telecom industry since 2005.
We produce a full line of coax support accessories, including RF Feeder Cables, RF Connectors & Jumper Cables, Weatherproof Enclosures, Cable Runway Components, Cable Hangers, Pulling Grips, Hoisting Grips, Grounding Bars, Grounding Kits, Cable Entry Plates & Boots, Crossover Plates, Antenna Pipe Support Clamps.
With years of manufacturing and experience in telecom industry, Volda has set up two plant areas to provide a full line of coax accessories and weatherproofing. Our products have been selected and used by both operators and distributors throughout the world, covering North America, Europe, Middle East, etc.
► Professional team work
► Experienced manufacturing & custom designing
► Self-owned tooling department
► Quality inspection from materails to product assembling
If you need a quote for feeder cable clamps, please email us or make a call.
Cell Phone: +86 138 5128 3001
WeChat +86 138 5128 3001