Home > Find Your Right One Feeder Clamp Manufacturer and Supplier

Find Your Right One Feeder Clamp Manufacturer and Supplier

    Aug 27, 2018 - VOLDA

    Feeder Clamps are widely used in site installation to fix (hold) rf feeder cables, providing an efficient way of managing and securing to feeder installation system. Volda feeder clamps are manufactured out of non-rusting stainless steel and UV resistant PP material, they can fit with worldwide brands of feeder cables like CommScope, Times Microwave, Amphenol, Huber+Suhner, Rosenberger, RFS, Acome, Leoni, Hansen, Bleden, Trilogy. We now supply feeder clamps for cable 1/4”, 3/8”, 1/2”, 7/8”, 1-1/4”, 1-5/8" and all other small diameter fiber cables & power cables.

    In 4G/5G networking, fiber optic cables and power cables are installed up to outdoor cell tower, workers need to use combined clamps which can fix both of these cables. Fiber cables usually vary among 5.0-11.0mm OD, power cables usually vary among 10.0-24.0mm OD. Volda provides various configuration clamps to meet your needs.

    feeder clamps, feeder cable clamps

    Various Sizes of Feeder Clamps: 

    1/4" Feeder Clamp
    The 1/4" feeder clamp 
    (7.0 +/-1mm) is designed to secure 1 to 6 feeder cables at any base station. Clamp it up on cable ladder, rung, bracket, I-beam, profile lattice mast etc. Requires only standard tools and is easy to mount and handle. It can bear wind speed up to 60 m/s. The protected design prevents damage of feeder even if over- torque under installation is used. Recommended clamping distance is max 0.8 meter. The U-bar has a width of opening of 20 +/-0.5 mm. 

    3/8" Feeder Clamp
    The 3/8" feeder clamp 
    (10.2 +/-1mm) is designed to secure 1 to 6 feeder cables at any base station. Clamp it up on cable ladder, rung, bracket, I-beam, profile lattice mast etc. Requires only standard tools and is easy to mount and handle. It can bear wind speed up to 60 m/s. The protected design prevents damage of feeder even if over- torque under installation is used. Recommended clamping distance is max 0.8 meter. The U-bar has a width of opening of 20 +/-0.5 mm. 

    1/2" Feeder Clamp
    The 1/2" feeder clamp 
    (16.0 +/-1mm) is designed to secure 1 to 6 feeder cables at any base station. Clamp it up on cable ladder, rung, bracket, I-beam, profile lattice mast etc. Requires only standard tools and is easy to mount and handle. It can bear wind speed up to 60 m/s. The protected design prevents damage of feeder even if over- torque under installation is used. Recommended clamping distance is max 0.8 meter. The U-bar has a width of opening of 20 +/-0.5 mm. 

    7/8" Feeder Clamp
    The 7/8" feeder clamp 
    (27.5 +/-1mm) is designed to secure 1 to 6 feeder cables at any base station. Clamp it up on cable ladder, rung, bracket, I-beam, profile lattice mast etc. Requires only standard tools and is easy to mount and handle. It can bear wind speed up to 60 m/s. The protected design prevents damage of feeder even if over- torque under installation is used. Recommended clamping distance is max 0.8 meter. The U-bar has a width of opening of 20 +/-0.5 mm. 

    1 1/4" Feeder Clamp
    The 1 1/4" feeder clamp 
    (40.0 +/-1mm) is designed to secure 1 to 6 feeder cables at any base station. Clamp it up on cable ladder, rung, bracket, I-beam, profile lattice mast etc. Requires only standard tools and is easy to mount and handle. It can bear wind speed up to 60 m/s. The protected design prevents damage of feeder even if over- torque under installation is used. Recommended clamping distance is max 0.8 meter. The U-bar has a width of opening of 20 +/-0.5 mm. 

    1 5/8" Feeder Clamp
    The 1 5/8" feeder clamp 
    (50.0 +/-1mm) is designed to secure 1 to 6 feeder cables at any base station. Clamp it up on cable ladder, rung, bracket, I-beam, profile lattice mast etc. Requires only standard tools and is easy to mount and handle. It can bear wind speed up to 60 m/s. The protected design prevents damage of feeder even if over- torque under installation is used. Recommended clamping distance is max 0.8 meter. The U-bar has a width of opening of 20 +/-0.5 mm. 

    Advantages of Volda 
    With years of manufacturing and experience in telecom industry, Volda has set up two plant areas to provide a full line of coax accessories and weatherproofing. Our products have been selected and used by operators and distributors throughout the world, covering North America, Europe, Middle East, etc. Welcome to contact Volda today, let's help grow your business and win the market with our support. 

    Website: www.voldatech.com
    Email: sales@voldatech.com
    Phone: +86 138 5128 3001
    WhatsApp: +86 138 5128 3001


                                            

HOT BLOG

  • Aug 03, 2018 | Blog

    Volda has launched a new website to service you

  • Sep 13, 2018 | Blog

    Fiber Cable Clamp for Huawei Projects

  • Sep 30, 2018 | Blog

    Volda is about to celebrate China's National Day tomorrow

  • Jul 30, 2018 | Blog

    Pay Attention to 5G Indoor Mobile Networks

  • Sep 20, 2018 | Blog

    Happy Mid-Autumn Festival to All Customers

  •